What is Engineered Wood Flooring?

Wood floors is an ever-popular choice for all sorts of homes. It is a classic décor attribute which won’t ever go out of fashion, but a good hardwood flooring can be exceedingly expensive to buy and install. Bearing this in mind, there are a lot of alternative options that clients can opt for instead.

Engineered hardwood floors is essentially a cheap, attractive alternative to solid wood flooring. The simple fact that it is engineered, instead of solid, shouldn’t be viewed as a negative. Each board is made from timber, but it includes numerous layers. Each plank is laid so that the grain runs perpendicularly, thus ensuring that the wood cannot swell or shrink with changes in humidity or temperature. This increases the firmness and strength of the ground, making sure that it will endure for years rather than months.

The top layer of this board (that the lamella) will always be some sort of solid timber, normally a hardwood, and may be up to 6mm thick in some cases. The lamella is then bonded to 1-2 further layers of soft plywood or something comparable.

What are its benefits?
Engineered wood planks are much more secure than their solid wood counterparts, and may be cut in broader measurements for extra stability and a decreased likelihood of problems occurring with the floor as a whole.
They are also generally available pre-finished if you would rather not complete them yourself. This saves time and effort on your part, making sure that the flooring may be utilized as soon as it is installed.
Engineered wood is also a lot more flexible concerning the techniques which may be used to install it.
It may be used in any room of the home aside from a bathroom or wet room, as routine exposure to steam or water may age the timber significantly and decrease the amount of years it can be used for.

What are timber ranges?
Wood grades essentially define the attribute of the timber concerning the way it seems, taking into account the amount of knots visible and the amount of filler used to treat sapwood defects.

A prime tier has barely any flaws, and those that it will have will be extremely tiny. There will also be a very minimum amount of filler used, and little variation in the color of the wood.
A select tier has little, infrequent knots plus some variation in the color of the timber. There can also be some observable checks (cracks across the growth rings). Filler will probably have been utilized, but should match the color of the timber.
A character or traditional grade includes a higher amount of big knots and checks, along with some possible end shake (cracks between the growth rings). Filler will likely have been used, but should match the colour of the timber.
A natural or rustic tier has a very large (virtually infinite ) variety of knots and tests with probable end shake and a high amount of filler used that will match the shade of the wood.

How do I install engineered timber flooring?
The floating floor installation method is the most common as much as engineered wood flooring is worried, because it’s readily accommodated and allows some room for movement and growth of the planks (even though they should barely be expanding anyhow ). This is because the boards are fixed to each other rather than to the subfloor. The process also means they may be easily consumed if necessary, lending itself well to commercial properties in which wholesale changes might be produced with a switch in possession.

Can I install it over a underfloor heating system?
The suitability of engineered wood flooring to use over an underfloor heating system is among its main advantages. As previously noted, it is uniquely constructed to take care of changes in temperature, so it’s more than capable (especially if it’s a lamella made from pine ) of adjusting to an abrupt rise and decrease in heat. Hardwood floors, on the other hand, would not be appropriate to use.

What type of end can I give it?
It’s possible to finish an engineered wood floor with either acrylic or lacquer. Some consider oil for a more attractive option as it’s able to penetrate the wood throughout the grain and bring out the rustic edge it lends itself so efficiently. However, a sub-floor is a bit easier to take good care of than the flooring, which necessitates regular waxing and buffing to make certain it always looks its best. With a lacquered flooring you need just vacuum and dust to keep it looking spick and span, with a spray bottle if wet cleaning is required.

Could I purchase sustainable engineered timber flooring?
Whether you are able to buy sustainable engineered timber flooring will depend on where the retailer you’re planning to purchase from has got the timber. The flooring should be marked as FSC or PEFC-certified on the website – that the two organisations are the biggest and most influential forestry regulators in the world, ensuring that everything from workers’ rights and the responsible management of global forests to the maintenance of biodiversity and vital areas. If there are some doubts about where the timber has been chosen from, double-check with the retailer.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s